knitted hat Archives - Mirella Moments

Ocean Waves Hat knitting pattern

Mirella — Fri, 21 Nov 2025 14:58:34 +0000

Disclosure: This post may contain affiliate links, and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Ocean Waves Hat is worked from the bottom up in the round without seams. The folded brim is knit in 2×2 rib, and the body of the hat is knit in cable rib pattern.

The hat is knit with medium-weight yarn.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 18stitches x 24rows = 10x10cm (4×4″) in stockinette stitch after blocking on larger needles.

Size:

To fit actual head circumference: Adult medium (54-56cm/ 21.25- 22″).
Finished height: 22cm/8.75″ with the brim folded up 7cm (2.75″).

You might also like:

PIN this for later!

Supplies

To knit this hat, you will need the following supplies:

Yarn: ~95g (3.35 oz) medium-weight yarn (category #4). I used Drops Nepal in the color light blue (mix 8913). It’s a blend of 65% wool and 35% alpaca. If you don’t have the mentioned yarn at hand, here are similar yarn options:

LION BRAND Local Grown

4mm (US 6) 40cm (16″) circular knitting needles.
4.5mm (US 7) 40cm (16″) circular knitting needles.
4.5mm (US7) 80cm (32″) circular needles or a set of double-pointed needles (for crown decreases).
Tapestry needle.
Scissors.
Stitch marker.

Abbreviations

C2B – Slip 1 stitch onto cable needle and leave at back of work. Knit the next stitch, then knit the stitch from the cable needle.

CO – cast on

K – knit

K2tog – knit two stitches together

P – purl

P2tog – purl two stitches together

St (s) – stitch (es)

* * – repeat from * to * until the end of the row or the stated number of times

OCEAN WAVE HAT KNITTING PATTERN

Cast on

CO on 96 sts using the Long-tail cast-on method or the one you prefer.

Join in the round, being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 96 + 1 extra stitch.

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one that we have passed from the left needle)

Step 4: Put that slipped st from the right needle to the left needle: 96 sts left. Pull on the strands to tighten.

Turn the knitting so the wrong side of the cast-on is facing you. This way, the neat side of the cast-on will be visible when the brim is folded.

Brim

Round 1: *P2, K2* to end.

Repeat round 1 until the brim measures 14cm / 5.5″.

Body

Rounds 1-3: *P2, K2* to end.

Round 4: *P2, C2B* to end.

Repeat rounds 1-4 7 more times. Repeat round 1.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *P2tog, K2* to end (72sts).

Round 2: *P1, K2* to end.

Round 3: *P1, K2tog* to end (48sts).

Round 4: *P1, K1* to end.

Round 5: *K2tog* to end (24sts).

Round 6: *P1, K1* to end.

Round 7: *K2tog* to end (12sts).

Finishing

Cut the yarn, leaving approximately a 15cm (6″) long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Fireplace Hat knitting pattern

Mirella — Thu, 18 Sep 2025 14:41:32 +0000

Disclosure: This post may contain affiliate links, and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Fireplace Hat is a ribbed beanie. It is knit in 2×2 rib from the bottom up in the round without seams, and it has a folded brim. The hat is knit with medium-weight yarn.

The hat is easy to knit. You will knit a long ribbed tube using circular knitting needles and gradually shape the crown.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 19 stitches x 28 rows = 10 x 10cm (4 x 4″ ) in stockinette stitch after blocking.

Size:

To fit actual head circumference: Adult medium (54-56cm/ 21.25- 22″).
Finished height: 21cm/8.25″ with the brim folded up 7cm (2.75″).

You might also like:

PIN this for later!

Supplies

To knit this hat, you will need the following supplies:

Yarn: ~90g (3.2 oz) medium-weight yarn (category #4). I used Drops Nepal in the color walnut (mix 8917). It’s a blend of 65% wool and 35% alpaca. If you don’t have the mentioned yarn at hand, here are similar yarn options:

LION BRAND Local Grown

4mm (US 6) 40cm (16″) circular knitting needles
4mm (US6) 80cm (32″) circular needles or a set of double-pointed needles (for the crown decreases).
Tapestry needle
Scissors
4 stitch markers (one for the beginning of the round, and 4 for crown decreases)

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

K2tog – knit two stitches together

Ssk – slip 2 stitches knitwise, put them back on the left needle, knit through back loops together

PM – place marker

* * – repeat from * to * until the end of the row or the stated number of times

FIREPLACE HAT KNITTING PATTERN

Cast on

CO on 96 sts using the Long-tail cast-on method or the one you prefer.

Join in the round, being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 96 + 1 extra stitch.

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one that we have passed from the left needle)

Step 4: Put that slipped st from the right needle to the left needle: 96 sts left. Pull on the strands to tighten.

Turn the knitting so the wrong side of the cast-on is facing you. This way, the neat side of the cast-on will be visible when the brim is folded.

Hat

Round 1: *K2, P2* to end.

Repeat round 1 until the hat measures 21cm / 8.25″.

On the last round, place 3 additional stitch markers as follows:

*24sts, PM* 3 times, 24 sts.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *Work in 2×2 rib to 2sts before marker, P2Tog* 4 times.

Repeat round 1 until there are 16 sts left (finish with round 1).

Finishing

Cut the yarn, leaving approximately a 15cm (6″) long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Simply soak the knitted item in lukewarm water with some soak wash for 10-15 minutes. Lift it from the water and gently squeeze the excess water out. Next, lay it on a clean towel (make sure it doesn’t transfer color), and roll it up to remove moisture.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other hat knitting patterns.

Thank you for stopping by,
Mirella.

Delicate Light Hat knitting pattern

Mirella — Tue, 22 Jul 2025 14:00:25 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Delicate Light Hat is a ribbed beanie, knit in 1×1 rib. It is worked from the bottom up in the round without seams. The hat is knit with medium-weight yarn.

The hat is really easy to knit. You will knit a long ribbed tube using circular knitting needles and shape the crown.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 19 stitches x 28 rows = 10 x 10cm (4 x 4″ ) in stockinette stitch after blocking.

Size:

To fit actual head circumference: Adult medium (54-56cm/ 21.25- 22″).
Finished height: 21cm/ 8.25″ with the brim folded up 7cm (2.75″).

You might also like:

PIN this for later!

Supplies

To knit this hat, you will need the following supplies:

Yarn: ~100g (3.5 oz) medium weight yarn (category #4). I used Drops Nepal in the color dandelion (uni color 8920). It’s a blend of 65% wool and 35% alpaca. If you don’t have the mentioned yarn at hand, here are similar yarn options:

LION BRAND Local Grown

4mm (US 6) 40cm (16″) circular knitting needles
4mm (US6) 80cm (32″) circular needles or a set of double-pointed needles (for the crown decreases).
Tapestry needle
Scissors
9 stitch markers (one for the beginning of the round, and 8 for crown decreases)

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

K2tog – knit two stitches together

Ssk – slip 2 stitches knitwise, put them back on the left needle, knit through back loops together

PM – place marker

SM – slip marker

* * – repeat from * to * until the end of the row or the stated number of times

DELICATE LIGHT HAT KNITTING PATTERN

Cast on

CO on 96 sts using the Long-tail cast-on method or the one you prefer.

Join in the round, being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 96 + 1 extra stitch.

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one that we have passed from the left needle)

Step 4: Put that slipped st from the right needle to the left needle: 96 sts left. Pull on the strands to tighten.

Turn the knitting so the wrong side of the cast-on is facing you. This way, the neat side of the cast-on will be visible when the brim is folded.

Hat

Round 1: *k1, p1* to end.

Repeat round 1 until the hat measures 20cm.

On the last round, place 8 stitch markers as follows:

11sts, PM, 3st, PM, *21sts, PM, 3st, PM* 3 times, 10 sts.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *Work in 1×1 rib to 2sts before marker, K2tog, Sm, P1, K1, P1, SM, Ssk* 4 times, work in 1×1 rib until end.

Round 2: Work sts as they appear (knit the knit sts, purl the purl sts).

Repeat rounds 1-2 until there are 24 sts left (finish with round 2).

Last round: K2tog (16sts left).

Finishing

Cut the yarn, leaving approximately a 15cm (6″) long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other hat knitting patterns.

Thank you for stopping by,
Mirella.

Morning Fog Hat knitting pattern

Mirella — Fri, 18 Jul 2025 15:38:18 +0000

Disclosure: This post may contain affiliate links, and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Morning Fog Hat is a ribbed beanie. It is knit in 2×2 rib from the bottom up in the round without seams, and it has a folded brim. The hat is knit with medium-weight yarn.

The hat is easy to knit. You will knit a long ribbed tube using circular knitting needles and gradually shape the crown.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 19 stitches x 28 rows = 10 x 10cm (4 x 4″ ) in stockinette stitch after blocking.

Size:

To fit actual head circumference: Adult medium (54-56cm/ 21.25- 22″).
Finished height: 21cm/8.25″ with the brim folded up 7cm (2.75″).

You might also like:

PIN this for later!

Supplies

To knit this hat, you will need the following supplies:

Yarn: ~90g (3.2 oz) medium-weight yarn (category #4). I used Drops Nepal in the color gray (mix 0501). It’s a blend of 65% wool and 35% alpaca. If you don’t have the mentioned yarn at hand, here are similar yarn options:

LION BRAND Local Grown

4mm (US 6) 40cm (16″) circular knitting needles
4mm (US6) 80cm (32″) circular needles or a set of double-pointed needles (for the crown decreases).
Tapestry needle
Scissors
5 stitch markers (one for the beginning of the round, and 4 for crown decreases)

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

K2tog – knit two stitches together

Ssk – slip 2 stitches knitwise, put them back on the left needle, knit through back loops together

PM – place marker

* * – repeat from * to * until the end of the row or the stated number of times

MORNING FOG HAT KNITTING PATTERN

Cast on

CO on 96 sts using the Long-tail cast-on method or the one you prefer.

Join in the round, being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 96 + 1 extra stitch.

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one that we have passed from the left needle)

Step 4: Put that slipped st from the right needle to the left needle: 96 sts left. Pull on the strands to tighten.

Turn the knitting so the wrong side of the cast-on is facing you. This way, the neat side of the cast-on will be visible when the brim is folded.

Hat

Round 1: *K1, P2, K1* to end.

Repeat round 1 until the hat measures 21cm / 8.25″.

On the last round, place 4 stitch markers as follows:

12sts, PM, *24sts, PM* 3 times, 12sts.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *Work in 2×2 rib to 2sts before marker, K2tog, Ssk* 4 times, work in 2×2 rib until end.

Round 2: Work sts as they appear (knit the knit sts, purl the purl sts).

Repeat rounds 1-2 until there are 16 sts left (finish with round 1).

Finishing

Cut the yarn, leaving approximately a 15cm (6″) long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other hat knitting patterns.

Thank you for stopping by,
Mirella.

Soft Melody Hat knitting pattern

Mirella — Sun, 06 Jul 2025 17:28:47 +0000

Disclosure: This post may contain affiliate links, and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Soft Melody Hat is a ribbed beanie. It is knit in 2×2 rib from the bottom up in the round without seams, and it has a folded brim. The hat is knit with medium-weight yarn.

The hat is easy to knit. You will knit a long ribbed tube using circular knitting needles and gradually shape the crown.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 19 stitches x 28 rows = 10 x 10cm (4 x 4″ ) in stockinette stitch after blocking.

Size:

To fit actual head circumference: Adult medium (54-56cm/ 21.25- 22″).
Finished height: 21cm/8.25″ with the brim folded up 7cm (2.75″).

You might also like:

PIN this for later!

Supplies

To knit this hat, you will need the following supplies:

Yarn: ~90g (3.2 oz) medium-weight yarn (category #4). I used Drops Nepal in the color powder pink (uni color 3112). It’s a blend of 65% wool and 35% alpaca. If you don’t have the mentioned yarn at hand, here are similar yarn options:

LION BRAND Local Grown

4mm (US 6) 40cm (16″) circular knitting needles
4mm (US6) 80cm (32″) circular needles or a set of double-pointed needles (for the crown decreases).
Tapestry needle
Scissors
9 stitch markers (one for the beginning of the round, and 8 for crown decreases)

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

K2tog – knit two stitches together

P2tog – purl two stitches together

Ssk – slip 2 stitches knitwise, put them back on the left needle, knit through back loops together

PM – place marker

* * – repeat from * to * until the end of the row or the stated number of times

SOFT MELODY HAT KNITTING PATTERN

Cast on

CO on 96 sts using the Long-tail cast-on method or the one you prefer.

Join in the round, being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 96 + 1 extra stitch.

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one that we have passed from the left needle)

Step 4: Put that slipped st from the right needle to the left needle: 96 sts left. Pull on the strands to tighten.

Turn the knitting so the wrong side of the cast-on is facing you. This way, the neat side of the cast-on will be visible when the brim is folded.

Hat

Round 1: *P1, K2, P1* to end.

Repeat round 1 until the hat measures 21cm / 8.25″.

On the last round, place 8 stitch markers as follows:

10sts, PM, 4sts, PM, *20sts, PM, 4sts, PM* 3 times, 10sts.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *Work in 2×2 rib to 2sts before marker, K2tog, K1, P2, K1, Ssk* 4 times, work in 2×2 rib until end.

Round 2: Work sts as they appear (knit the knit sts, purl the purl sts).

Repeat rounds 1-2 until there are 24 sts left (finish with round 1).

Last round: *K2tog, P2tog, K2tog* 4 times (12 sts left).

Finishing

Cut the yarn, leaving approximately a 15cm (6″) long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other hat knitting patterns.

Thank you for stopping by,
Mirella.

Woodland Hat knitting pattern

Mirella — Sat, 28 Jun 2025 17:38:13 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Woodland Hat is a ribbed everyday beanie. It is knit from the bottom up in the round without seams. The hat is knit with medium-weight yarn.

The hat is really easy to knit. You will knit a long ribbed tube using circular knitting needles and shape the crown.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 19 stitches x 28 rows = 10 x 10cm (4 x 4″ ) in stockinette stitch after blocking.

Size:

To fit actual head circumference: Adult medium (54-56cm/ 21.25- 22″).
Finished height: 21cm/ 8.25″ with the brim folded up 7cm (2.75″).

You might also like:

PIN this for later!

Supplies

To knit this hat, you will need the following supplies:

Yarn: ~100g (3.5 oz) medium weight yarn (category #4). I used Drops Nepal in the color camel (mix 0618). It’s a blend of 65% wool and 35% alpaca. If you don’t have the mentioned yarn at hand, here are similar yarn options:

LION BRAND Local Grown

4mm (US 6) 40cm (16″) circular knitting needles
4mm (US6) 80cm (32″) circular needles or a set of double-pointed needles (for the crown decreases).
Tapestry needle
Scissors
9 stitch markers (one for the beginning of the round, and 8 for crown decreases)

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

K2tog – purl two stitches together

Ssk – slip 2 stitches knitwise, put them back on the left needle, knit through back loops together

* * – repeat from * to * until the end of the row or the stated number of times

WOODLAND HAT KNITTING PATTERN

Cast on

CO on 96 sts using the Long-tail cast-on method or the one you prefer.

Join in the round, being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 96 + 1 extra stitch.

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one that we have passed from the left needle)

Step 4: Put that slipped st from the right needle to the left needle: 96 sts left. Pull on the strands to tighten.

Turn the knitting so the wrong side of the cast-on is facing you. This way, the neat side of the cast-on will be visible when the brim is folded.

Hat

Round 1: *p1, k1* to end.

Repeat round 1 until the hat measures 21cm.

On the last round, place 8 stitch markers as follows:

12sts, PM, 1st, PM, *23sts, PM, 1st, PM* 3 times, 11 sts.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *Work in 1×1 rib to 2sts before marker, K2tog, P1, Ssk* 4 times, work in 1×1 rib until end.

Round 2: Work sts as they appear (knit the knit sts, purl the purl sts).

Repeat rounds 1-2 until there are 16 sts left (finish with round 1).

Finishing

Cut the yarn, leaving approximately a 15cm (6″) long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other hat knitting patterns.

Thank you for stopping by,
Mirella.

Lava Hat knitting pattern

Mirella — Mon, 28 Apr 2025 13:00:48 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Lava Hat is a warm everyday hat. It is a ribbed beanie knit from the bottom up in the round without seams. This hat is knitted with medium-weight yarn.

The hat is designed to be close-fitting and has a folded double brim, which makes it extra warm. You can knit a few additional rounds, if you want the hat to stand up from the head a bit.

The hat is really easy to knit. You will knit a long ribbed tube using circular knitting needles, and shape the crown in the last 7 rounds.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 19 stitches x 28 rows = 10 x 10cm (4 x 4″ ) in stockinette stitch after blocking.

Size:

To fit actual head circumference: Adult small (51-53cm/20-20.85″), Adult medium (54-56cm/ 21.25- 22″), Adult large (57-59 cm/ 22.4- 23.25″).
Finished height: 19 (20) 21cm/ 7.5 ( 7.85) 8.25″ with the brim folded up 8cm (3.15″).

You might also like:

PIN this for later!

Supplies

To knit this hat you will need the following supplies:

Yarn: ~120g (4.2 oz) medium-weight yarn (category #4). I used Drops Nepal in the color orange (mix 2920). It’s a blend of 65% wool and 35% alpaca. If you don’t have the mentioned yarn at hand, here are similar yarn options:

LION BRAND Local Grown

Scrap yarn
4mm (US 6) 40cm (16″) circular knitting needles
4mm (US6) 80cm (32″) circular needles or a set of double-pointed needles (for the crown decreases).
Tapestry needle
Scissors

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

K2tog – knit two stitches together

P2tog – purl two stitches together

* * – repeat from * to * until the end of the row or the stated number of times

LAVA HAT KNITTING PATTERN

Provisional cast-on

With the waste yarn and crochet hook, chain approximately 100 (104) 108 stitches. Cut the tail and pull it through the last stitch.

With the working yarn and circular needles, cast on 92 (96, 100) stitches: skip 3 or 4 chains, insert the needle through the back bump of the chain, and pull out a loop – that’s one stitch. Continue until you have 92 (96) 100 stitches on the needle.

Join in the round, being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

Brim

Round 1: *P2, K2* to end.

Repeat round 1 until the brim measures 16cm / 6.3″.

Fold the brim.

Unpick the first provisional cast-on stitch, place that live stitch on the left-hand needle, and purl it together with the stitch.

Continue until the end of the round: unpick one stitch, place it on the left-hand needle, and purl or knit two stitches together, depending on the established pattern.

Hat

Round 1: *P2, K2* to end.

Repeat round 1 until the hat measures 24.5 (25.5) 27cm / 9.5 (10) 10.5″ from the cast-on edge.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *P2tog, K2*, to end. 69 (72) 75 sts left.

Round 2: *P1, K2*, to end.

Round 3: *P1, K2tog* to end. 46 (48) 50 sts left.

Round 4: *P1, K1*, to end.

Round 5: K2tog to end. 23 (24) 25 sts left.

Round 6: K to end.

Adult small:

Round 7: K2tog to last st, K1. 12 sts left.

Adult medium:

Round 7: K2tog to end. 12 sts left.

Adult large:

Round 7: K2tog to last st, K1. 13 sts left.

Finishing

Cut the yarn, leaving approximately a 15cm (6″) long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches.

Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other hat knitting patterns.

Thank you for stopping by,
Mirella.

Butterscotch Hat knitting pattern

Mirella — Sun, 16 Feb 2025 09:57:25 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Butterscotch Hat is a great everyday hat. It is a ribbed beanie knit from the bottom up in the round without seams. This hat is knitted with medium-weight yarn.

The hat is designed to be close-fitting and has a folded brim. You can knit a few additional rounds, if you want the hat to stand up from the head a bit.

The hat is really easy to knit. You will knit a long ribbed tube using circular knitting needles, and shape the crown in the last 4 rounds.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 19 stitches x 28 rows = 10 x 10cm (4 x 4″ ) in stockinette stitch after blocking.

Size:

To fit actual head circumference: Adult small (51-53cm/20-20.85″), Adult medium (54-56cm/ 21.25- 22″), Adult large (57-59 cm/ 22.4- 23.25″).
Finished height: 19 (20) 21cm/ 7.5 ( 7.85) 8.25″ with the brim folded up 7cm (2.75″).

You might also like:

PIN this for later!

Supplies

To knit this hat you will need the following supplies:

Yarn: ~100g (3.5 oz) medium weight yarn (category #4). I used Drops Nepal in the color goldenrod (uni color 2923). It’s a blend of 65% wool and 35% alpaca. If you don’t have the mentioned yarn at hand, here are similar yarn options:

LION BRAND Local Grown

4mm (US 6) 40cm (16″) circular knitting needles
4mm (US6) 80cm (32″) circular needles or a set of double-pointed needles (for the crown decreases).
Tapestry needle
Scissors

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

K2tog – knit two stitches together

P2tog – purl two stitches together

* * – repeat from * to * until the end of the row or the stated number of times

BUTTERSCOTCH HAT KNITTING PATTERN

Cast on

CO on 92 (96, 100) sts using the Long-tail cast-on method or the one you prefer.

Join in the round being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 92 (96) 100+ 1 extra stitch.

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one, that we have passed from the left needle)

Step 4: Put that slipped st from the right needle to the left needle: 92 (96) 100 sts left. Pull on the strands to tighten.

Turn the knitting so the wrong side of the cast-on is facing you. This way, the neat side of the cast-on will be visible when the brim is folded.

Hat

Round 1: *P2, K2* to end.

Repeat round 1 until the hat measures 24.5 (25.5) 27cm / 9.5 (10) 10.5″.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *P2tog, K2*, to end 69 (72) 75 sts left.

Round 2: *P1, K2tog* to end. 46 (48) 50 sts left.

Round 3: K2tog to end. 23 (24) 25 sts left.

Adult small:

Round 4: K2tog to last st, K1. 12 sts left.

Adult medium:

Round 4: K2tog to end. 12 sts left.

Adult large:

Round 4: K2tog to last st, K1. 13 sts left.

Finishing

Cut the yarn leaving approximately a 15cm (6″) long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other hat knitting patterns.

Thank you for stopping by,
Mirella.

Summit Hat knitting pattern

Mirella — Fri, 08 Dec 2023 08:03:13 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Summit Hat features braided cables and slipped stitches. The hat is knitted in the round seamlessly from the bottom up. You will knit the brim first, then the body of the hat, and shape the crown.

The hat is designed with a negative ease to fit snugly.

This hat is knitted with medium-weight merino wool.

You might want to knit a matching cowl – Summit Cowl knitting pattern.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 17 stitches x 22 rows = 10 x 10cm (4 x 4″ ) in stockinette stitch after blocking.

Circumference to fit: Adult medium (54-56cm/ 21.25- 22″).

Finished height: 20.5cm (8″).

You might also like:

PIN this for later!

Supplies

To knit this hat you will need the following supplies:

Yarn: ~85g (3 oz) medium weight yarn (category #4). I used Drops Big Merino in the color lavender (mix 09). It’s 100% merino wool. If you don’t have the mentioned yarn at hand, here are similar yarn options:

4mm (US 6) 40cm (16″) circular knitting needles (for the brim).
5mm (US8) 40cm (16″) circular knitting needles (for the main pattern).
5mm (US8) double-pointed needles or 80cm (32″) circular needles (for the crown decreases).
Tapestry needle
Scissors

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

Sl – slip stitch purlwise with yarn in back

K2tog – knit two stitches together

P2tog – purl two stitches together

M1 – make one stitch knitwise

C6F – slip 3 stitches onto cable needle and leave at front of work. Knit the next 3 stitches, then knit the 3 stitches from the cable needle.

C6B – slip 3 stitches onto cable needle and leave at back of work. Knit the next 3 stitches, then knit the 3 stitches from the cable needle.

*-* – repeat to end of the round or stated amount of times

SUMMIT HAT KNITTING PATTERN

Cast on

With smaller needles, CO on 98 sts using the Long-tail cast-on method or the one you prefer.

Join in the round being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 98 + 1 extra st (a total of 99 sts).

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one, that we have passed from the left needle)

Step 4: Put that slipped st from the right needle to the left needle (98 sts left). Pull on the strands to tighten.

Brim

Round 1: *K1, P1* to end.

Repeat round 1 until the brim measures approx. 5 cm (2”) or your desired length.

Increases

Round 1: *K7, M1*, repeat 13 more times (112 sts).

Hat

Switch to larger needles.

Round 1: *P2, K9, P2, Sl1* repeat to end.

Round 2: *P2, K9, P2, K1* repeat to end.

Round 3: *P2, C6B, K3, P2, Sl1* repeat to end.

Round 4: *P2, K9, P2, K1* repeat to end.

Round 5: *P2, K9, P2, Sl1* repeat to end.

Round 6: *P2, K9, P2, K1* repeat to end.

Round 7: *P2, K3, C6F, P2, Sl1* repeat to end.

Round 8: *P2, K9, P2, K1* repeat to end.

Repeat rounds 1-8 three more times. Work rounds 1-2 one more time.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *P2tog, C6B, K3, P2tog, Sl1* to end (96 sts).

Round 2: *P1, K9, P1, K1* to end.

Round 3: *P1, K1, K2tog, K1, K2tog, K1, K2tog, P1, Sl1* to end (72 sts).

Round 4: *P1, K6, P1, K1* to end.

Round 5: *P1, K2tog, K2tog, K2tog, P1, Sl1* to end (48 sts).

Round 6: *P1, K3, P1, K1* to end.

Round 7: K2tog to end (24 sts).

Round 8: K to end.

Round 9: K2tog to end (12 sts).

Finishing

Cut the yarn leaving a long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other knitting patterns!

Thank you for stopping by,
Mirella.

Raindrops Hat knitting pattern

Mirella — Mon, 16 Oct 2023 14:17:11 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Hat overview

The Raindrops Hat is a comfortable beanie with a folded brim. The design features a two-row slip stitch pattern.

The hat is knitted in the round seamlessly from the bottom up. You will knit the brim first, then the body of the hat, and shape the crown.

The hat is designed with a negative ease to fit snugly.

This hat is knitted with medium weight merino wool.

You might want to knit a matching scarf – Raindrops Scarf knitting pattern.

You will find the knitting instructions below. Enjoy!

Be sure to check out my other hat knitting patterns.

Gauge: 21 stitches x 32 rows = 10 x 10cm (4 x 4″ ) in slip stitch pattern after blocking.

Circumference to fit: Adult small (51-53cm/20-20.85″), Adult medium (54-56cm/ 21.25- 22″), Adult large (57-59 cm/ 22.4- 23.25″).

Finished height: 22cm (8.6″) with a folded brim (8cm/3″).

You might also like:

PIN this for later!

Supplies

To knit this hat you will need the following supplies:

Yarn: ~115g (4.06 oz) medium weight yarn (category #4). I used Drops Big Merino in the color ice blue (uni 23). It’s 100% merino wool. If you don’t have the mentioned yarn at hand, here are similar yarn options:

4mm (US 6) 40cm (16″) circular knitting needles
4mm (US6) double-pointed needles or 80cm (32″) circular needles (for the crown decreases).
Tapestry needle
Scissors

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

K2tog – knit two stitches together

P2tog – purl two stitches together

Sl wyif – slip stitch purlwise with yarn in front

Sl wyib – slip stitch purlwise with yarn in back

* * – repeat from * to * until the end of the row or the stated amount of times

RAINDROPS HAT KNITTING PATTERN

Cast on

CO on 90 (96, 102) sts using the Long-tail cast-on method or the one you prefer.

Join in the round being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

Brim

You will knit the wrong side of the fabric, so when the brim is folded up – the right side of the fabric is visible.

Round 1: *K2, Sl1 wyif* to end.

Round 2: *K2, P1* to end.

Repeat rounds 1 and 2 until the brim measures approx. 8 cm (3”) or your desired length.

Hat

Round 1: *P2, Sl1 wyib* to end.

Round 2: *P2, K1* to end.

Repeat rounds 1 and 2 until the hat measures approx. 19cm (7.5″) or your desired length. End with round 1.

Crown

Switch to double-pointed needles or circular needles with a longer cable (for the magic loop method) when necessary.

Round 1: *P2tog, K1* to end.

Round 2: *P1, Sl1 wyib* to end.

Round 3: *K2tog* to end.

Round 4: K to end.

Round 5: *K2tog* to end.

Round 6 (size S, L): *K2tog* to last stitch, K1.

Round 6 (size M): *K2tog* to end.

Finishing

Cut the yarn leaving a long tail. Thread a tapestry needle and draw the tail tightly through the remaining stitches. Weave in all loose ends.

Wet block the finished item to set the finished size and even out the stitches.

Lay the item on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this hat knitting pattern, be sure to check out my other knitting patterns!

Thank you for stopping by,
Mirella.