knitted scarf Archives - Mirella Moments

Raindrops Scarf knitting pattern

Mirella — Fri, 06 Oct 2023 17:05:31 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Scarf overview

The Raindrops Scarf is a simple rectangle scarf, that is worked in a slip stitch pattern. The pattern is a two-row repeat, making it very easy to modify the length of the scarf.

The edges are worked in a 3-stitch i-cord.

This scarf is knitted with medium weight merino wool.

You might want to knit a matching hat – Raindrops Hat knitting pattern.

You will find the knitting instructions below.

Finished size:

Width: 20cm (7 ^3/4″)
Length: 170cm (67″)

If you want to make the scarf narrower/ wider, cast on fewer/ more stitches. One pattern repeat is worked over three stitches. Cast on a multiple of 3 stitches + 8 stitches for symmetry and edges.

If you want to make the scarf shorter/ longer, work fewer/ more pattern repeats. One pattern repeat is worked over two rows.

Gauge: 22 stitches x 26 rows = 10 x 10cm (4 x 4″ ) in slip stitch pattern after blocking.

Be sure to check out my other scarf knitting patterns.

You might also like:

PIN this for later!

Supplies

To knit this scarf you will need the following supplies:

Yarn: ~300g (10.6 oz) medium weight yarn (category #4). I used Drops Big Merino in the color ice blue (uni 23). It’s 100% merino wool. If you don’t have the mentioned yarn at hand, here are similar yarn options:

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

Sl wyif – slip stitch purlwise with yarn in front

Sl wyib – slip stitch purlwise with yarn in back

* * – repeat from * to * until the end of the row or the stated amount of times

RAINDROPS SCARF KNITTING PATTERN

Cast on

CO on 44 sts using the Long-tail cast-on method or the one you prefer.

Scarf

Row 1: K3, *P2, Sl1 wyib* twelve times, P2, Sl3 wyif

Row 2: K5, *P1, K2* to last three stitches, Sl3 wyif

Repeat rows 1-2 until you reach your desired length.

Bind off

Bind off sts in pattern (knit over knit and slipped stitches, purl over purl stitches).

Step 1: Work the first 2 sts, bring the first st over the second one.

Step 2: Work the next st, bring the first st over the second one.

Repeat step 2 until you have one stitch left, cut the yarn leaving a 4″ – 6″ tail to weave in later. Draw the yarn tail through the last stitch and pull it snug.

You will find a detailed tutorial on how to bind off stitches HERE.

Finishing

Weave in all loose ends.

Wet block the finished item. This process transforms the stitches and makes them look smoother and neater.

Simply soak the knitted item in lukewarm water with some soak wash for 10-15 minutes. Lift it from the water and gently squeeze the excess water out. Next, lay it on a clean towel, and roll it up to remove moisture.

Pin the item to a blocking board or lay it on a clean and dry towel (make sure it doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this scarf knitting pattern, be sure to check out my other knitting patterns!

Thank you for stopping by,
Mirella.

Sandstone scarf knitting pattern

Mirella — Mon, 05 Dec 2022 10:25:55 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Pattern overview

The Sandstone Scarf is a fun color block scarf knit with garter stitch. The chain selvedge creates a neat decorative edge.

The scarf is worked flat and is decorated with fringe.

The design features a combination of 3 different colors – beige, pink and yellow. It’s a perfect fall and winter accessory.

This scarf knitting pattern is great for newer knitters. It uses a basic stitch, and super chunky yarn and large needles make it such a quick knit.

You will find the knitting instructions below.

Gauge: 11 stitches x 11 rows = 10 x 10cm (4 x 4″) in garter stitch after blocking.

Finished size: 25cm (9 ^3/4″) wide and 160cm (63″) long (without the fringe).

If you want a narrower/wider scarf simply cast on fewer/more stitches.

If you want a shorter/longer scarf, simply knit fewer/more rows.

Be sure to check out my other scarf knitting patterns.

YOU MIGHT ALSO LIKE:

PIN this for later!

Supplies

To knit this scarf you will need the following supplies:

Yarn: ~230g (8.2 oz) super bulky weight yarn (category #6). I used Drops Wish in the colors beige (05), mauve (15), and curry (12), 2 balls of each. It’s enough to knit the scarf and make fringe. The yarn is a blend of 50% alpaca, 33% cotton, 17% wool. If you don’t have the mentioned yarn at hand, here are similar yarn options:

WE ARE KNITTERS The Squishy Yarn

Needles: 9mm (US13) knitting needles.
Tapestry needle
Scissors
Crochet hook (to add fringe)

ABBREVIATIONS

CO – cast on

St (s) – stitch (es)

K – knit

Sl – slip st purlwise with yarn in front

Rs – right side

Ws – wrong side

* * – repeat from * to * until the end of the row or the stated amount of times

SANDSTONE SCARF KNITTING PATTERN

Cast on

CO on 27 sts using the Long-tail cast-on method or the one you prefer.

Scarf

The scarf is knit with garter stitch. The first stitch of every row is slipped purlwise with yarn in front to create a neat edge.

If you don’t want to make a decorative edge, you can simply knit the first stitch.

Change color every 30 rows, there are a total of six color block sections. To switch colors, simply cut the working yarn leaving at least a 10cm (4″) long tail and start the next row with the new yarn.

Row 1: Sl1, K to end.

Repeat row 1 until you have worked all six sections.

Bind off

Bind off sts purlwise.

Step 1: Purl 2 sts, bring the first st over the second one.

Step 2: Purl the next st, bring the first st over the second one.

Repeat step 2 until you have 1 stitch left, cut the yarn leaving a 10cm /4″ tail. Draw the yarn tail through the last stitch and pull it snug.

You will find a detailed tutorial on how to bind off knitting HERE.

Fringe

Cut 14 pieces of yarn in the first color you used and 14 pieces in the last color used, 30cm(12″) long each. Fringe is added into every other stitch along the cast-on and bind-off ends of the scarf.

Step 1: Insert a crochet hook under both legs of a stitch, from the back (wrong side) to the front (right side).

Step 2: Fold a strand in half and pull through the stitch to create a loop.

Step 3: Pull two ends through the loop and pull to tighten.

Repeat the steps to add the fringe to both edges of the scarf.

When you are done, trim the strands to even them out.

Finishing

Weave in all loose ends.

I always advise wet blocking the finished item, this process transforms the stitches, making them look smoother and neater.

Simply soak the knitted item in lukewarm water with some soak wash for 10-15 minutes. Lift it from the water and gently squeeze the excess water out. Next, lay it on a clean towel, and roll it up to remove moisture.

Pin the item to a blocking board or lay it on a clean and dry towel (make sure it doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this scarf knitting pattern, be sure to check out my other knitting patterns!

Thank you for stopping by,
Mirella.

Yarrow Scarf knitting pattern

Mirella — Fri, 18 Mar 2022 10:41:47 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

Scarf overview

The Yarrow scarf is a simple knitting project featuring garter stitch rib.

It is a two-row repeat and is easy to memorize. You will simply work a long rectangle.

If you want a narrower/wider scarf simply cast on fewer/more stitches. The pattern is a multiple of 4 stitches plus 1.

If you want a shorter/longer scarf, simply knit fewer/more rows. The pattern is a two-row repeat.

Be sure to check out my other scarf knitting patterns.

The scarf will look great with a matching headband – The Yarrow Headband.

Gauge: 21 stitches x 28 rows = 10 x 10cm (4 x 4″ ) in pattern after blocking.

Gauge is not crucial for this project.

Finished size: 20cm (8″) wide and 160cm (63″) long.

You will find the free knitting pattern below. Enjoy!

YOU MIGHT ALSO LIKE:

PIN this for later!

Supplies

To knit this scarf you will need the following supplies:

Yarn: ~ 240g (8.5 oz) DK / light worsted yarn (category #3). I used Drops Merino Extra Fine in the color light yellow (24). It’s 100% merino wool. If you don’t have the mentioned yarn at hand, here are other yarn options:

Needles: 4mm (US6) knitting needles or size needed to obtain the gauge.
Tapestry needle
Scissors

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

Sl – Slip st purlwise with yarn in front

* * – repeat from * to * until the end of the row or the stated amount of times

SCARF KNITTING PATTERN

Cast on

CO on 45 sts using the Long-tail cast-on method or the one you prefer.

Scarf

The first stitch of every row is slipped purlwise with yarn in front to create a neat chain edge.

If you don’t want to make a chain edge, you can simply knit the first stitch.

Row 1 (RS): Sl1, K to end.

Row 2 (WS): Sl1, *K3, P1,* K4.

Repeat rows 1 and 2 until the piece measures ~160 cm (63″) or your desired length. Finish with row 1 (RS).

Bind off

With the wrong side facing you, bind off sts knitwise.

Step 1: Knit 2, bring the first st over the second one.

Step 2: Knit the next st, bring the first st over the second one.

Repeat step 2 until you have 1 stitch left, cut the yarn leaving a 4″ – 6” tail to weave in later. Draw the yarn tail through the last st and pull it snug.

You will find a detailed tutorial on how to bind off knitting HERE.

Finishing

Weave in all loose ends.

Wet block the finished item, this process transforms the stitches, makes them look smoother and neater.

Pin the item to a blocking board or lay it on a clean and dry towel (make sure it doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this scarf knitting pattern, be sure to check out my other knitting patterns!

Thank you for stopping by,
Mirella.

Folgate Infinity Scarf knitting pattern

Mirella — Wed, 16 Feb 2022 15:36:32 +0000

Disclosure: This post may contain affiliate links and I may make a small commission on items purchased through links in this post at no extra cost to you. You can find out more in my Disclaimer.

The Folgate Infinity Scarf is a cozy and warm accessory.

It is knitted in English rib, which is really squishy and textured. It is knitted with soft merino wool.

The scarf is knitted from the bottom up in the round seamlessly.

This scarf will look great with a matching hat – Folgate Hat knitting pattern.

Gauge: 13 stitches x 22 rows = 10 x 10cm (4 x 4″ ) in pattern after blocking.

Size: Adult

Measurements:

Finished circumference: 110cm (43^1/4“).
Finished height: 20cm (7^3/4“).

You will find the free knitting pattern below. Enjoy!

RELATED POSTS:

PIN this for later!

Supplies

To knit this scarf you will need the following supplies:

Yarn: ~200g (7.05 oz) medium weight yarn (category #4). I used Drops Big Merino in the color lavender (mix 09). It’s 100% merino wool. If you don’t have the mentioned yarn at hand, here are other yarn options:

Needles: 4.5mm (US 7) 80cm (32”) circular knitting needles or size needed to obtain gauge.
Tapestry needle
Scissors
Stitch marker (optional)

Abbreviations

CO – cast on

St (s) – stitch (es)

K – knit

P – purl

Yo – yarn over

Sl – slip st purlwise with yarn in back

K2tog – knit two stitches together

P2tog – purl two stitches together

* * – repeat from * to * until the end of the row or the stated amount of times

SCARF KNITTING PATTERN

Cast on

Loosely CO 144 sts using the long-tail cast-on method or the one you prefer.

Join in the round being careful not to twist the sts (place a marker if you wish to mark the beginning of the round).

I prefer using the invisible join method:

Step 1: CO 144 + 1 extra st (a total of 145 sts).

Step 2: Slip the first st purlwise from the left needle to the right needle.

Step 3: Bring the second st from the right needle over the top of the first st (the one, that we have passed from the left needle)

Step 4: Put that slipped st from the right needle back to the left one ( 144 sts left). Pull on the strands to tighten.

Scarf

The scarf is worked in English rib.

Set-up round: *Yo, Sl1, K1* to end.

Round 1: *P2tog, Yo, Sl1,* to end.

Round 2: *Yo, Sl1, K2tog* to end.

Repeat rounds 1 and 2 until the piece measures approx. 20 cm (7 ^3/4”) or your desired length.

Bind off

Bind off sts loosely in pattern. If your bind-off edge looks too tight – use a size larger needles.

Step 1: P2tog, K1, bring the first st over the second one.

Repeat step 1 until you have 1 st left, cut the yarn leaving a 4″ – 6” tail to weave in later. Draw the yarn tail through the last st and pull it snug.

You will find a detailed tutorial on how to bind off knitting HERE.

Finishing

Weave in all loose ends.

Wet block the finished item, this process transforms the stitches, makes them look smoother and neater.

Pin the item to a blocking board or lay it on a clean and dry towel (that doesn’t transfer color) and let it dry. Your knitting will look much better after this.

I hope you enjoyed this scarf knitting pattern, be sure to check out my other knitting patterns!

Thank you for stopping by,
Mirella.